Turkey that is labeled "enhanced" or "flavor enhanced" or "self-basting" or "basted" has been injected with a salt solution at the packing plant. Kosher meat has also been treated with salt at the plant. Do not brine these meats. You risk making them too salty.
But if you have an unadulterated bird -- if you like your meat juicy, tender and flavorful -- there is one simple ingredient that can improve all three: Salt.
Here's how salting and brining can significantly improve your cooking, how they work, how to make wet and dry brines, and how to use them. To learn more about the different types of salt, read my article The Zen of Salt) and click here to read my recipe for The Ultimate Turkey (hint, it is cooked outdoors).
Salt and juicinessWhen we are cooking meat, some water evaporates from the surface and some is squeezed out by cells and connective tissues that contract under heat. Lean cuts, like chicken breasts, turkey breasts or pork loins can dry out easily when heat is applied, especially if you overcook them the tiniest bit. So you are faced with the problem of how to heat these meats to proper temps without making shoe leather. Surprisingly, salt can help.
Meat proteins are complex, long and coiled. When sodium and chloride ions get into the muscles, the electrical charges mess with the proteins, especially myosin, so they can hold onto moisture more tenaciously. As a result, less is lost during cooking.
When my favorite food mag, Cook's Illustrated did a test, they discovered that a chicken soaked in plain water and another soaked in a brine both gained about 6 percent by weight. When they cooked both ,as well as an unsoaked bird straight from the package, the chicken straight from the package lost 18 percent of its original weight, the chicken soaked in water lost 12 percent of its presoak weight, and the brined chicken lost only 7 percent of its presoaked weight. Add to that the 6 percent water gain in the brined bird, and you have a hen that is 11 percent more juicy than straight out of the package.
Best of all, according to research conducted by Dr. Greg Blonder for AmazingRibs.com, the brine and the moisture is concentrated near the surface. This counteracts one of the biggest problems of cooking. The meat on the surface is hotter and is almost always overcooked and dry by the time the center is properly cooked. The added moisture near the surface helps the area that needs the most help.
Salt and tenderness
Chewing takes energy and can give you a headache. Some meats, like the muscles of the chest or rump of a steer, are tougher than others. Some of that toughness comes from connective tissues that wrap around muscle fibers and bundles, but some of it comes from the structure of the proteins themselves. Cooking meat to the proper temperature can tenderize it by relaxing the proteins, a process called denaturing. Salt can also denature proteins even before the heat hits them.
Salt and flavor
Salt is a flavor amplifier; it suppresses the impression of bitterness, and it actually expands your taste buds. Many of us sprinkle salt on meat when it is served because it just makes meat taste better. Brining helps bring the benefits of salt to every bite, not just the surface.
On the other hand -- and there is always another hand -- too much salt can make food unpleasant. The trick is to not make the brine too salty and not to leave the meat in too long. Overbrining is just as bad as overcooking. If you overbrine, you are then essentially pickling or curing the meat. That's how corned beef is made, soaking beef brisket in salt and flavored water for a week or more.
Finally, because most brines also include sugar and spices, and some of them penetrate and stick to the surface and flavor the meat, they can also boost flavor by bringing more flavors to the game.
How to bring salt to the game
There are several techniques that you can use to bring the benefits of salt to meat: Wet brining, marinating, dry brining and injecting.
Wet brining. Somewhere back in time, a primordial hunter felled a dear and it tumbled off a cliff into the ocean. By the time he and his buddies clambered down to the beach and pulled the waterlogged carcass up on shore it had soaked in the seawater, a brine with about 4 percent salt, for more than an hour. They butchered it and schlepped the meat back to the camp where the women waited with a smoldering wood fire. Dinner that night was memorable. You can replicate the process around your campfire by making a salty brine and soaking your meat in it.
Marinating. Another solution (get it?) is to soak the meat in a flavorful marinade. Add salt to your marinade, and you should, and you have a wet brine. Read my article on marinades for more on the subject.
Dry brining. Another method is to dry brine. This is simply salting the meat in advance of cooking. The salt pulls moisture from the meat which dissolves the salt (NaCl) into sodium (Na) and chloride (Cl) ions. They then penetrate the meat and work their way towards the center. The problem is that it is hard to be consistent in how much salt you sprinkle on the meat from one day to the next.
Injecting. Another effective method is to inject meats with water, brine, broth, even butter, margarine or another flavorful fluid. If you do it right, you can add moisture and flavor. If you do it wrong, your meat tastes totally weird or you get pockets of liquid and hunks of dry meat.
Commercial meat packers inject brines into turkey, chicken and pork with rows of tiny needles. Nowadays it is getting hard to find chicken or turkey that has not been pumped up with a brine. Injection is faster than soaking in a brine and also means processors can inflate the weight by 10 percent or so, and charge the same for salt water as they do for muscle. Meat that is labeled "enhanced" or "flavor enhanced" or "self-basting" or "basted" has been injected with a salt solution at the packing plant. Kosher meat has also been treated with salt at the plant. Do not brine these meats. You risk making them too salty.
Watch for a future article devoted to injecting at home.
What to brine
Brining works best on chicken breasts, turkey breasts, lean pork loins, salmon and other oily fish. Chicken and turkey thighs and other cuts of pork usually are moist enough from fat that they don't need brines. But it can give them a boost. I have been known to brine pork ribs but most of the time, I don't bother. The return for the effort is minimal. I never brine red meats unless I am making corned beef.
Beware of double salt jeopardy
Rubs and spice blends are a great way to add flavor to meat. But rubs almost always contain salt because it amps up flavor and helps form a crust. You can use a rub on home brined or factory brined meats, but beware of double salt jeopardy. A salty rub on top of brined meat can make it unbearably salty. If you use brined meat or kosher meat and then a rub, you should make your own rub and leave the salt out of the blend. That's why I recently revised my popular Simon & Garfunkel Rub for chicken and turkey by leaving out the salt.
Also, remember that the drippings from a brined meat will be slightly salty, so if you make a gravy from drippings, be sure to taste before you add salt. Remember, you can always add salt, but it's almost impossible to take it away.
Beware of skin
Dry brining is a really good method, but keep in mind that chicken and turkey skin is mostly fat, loosely attached to the meat, and acts as a raincoat that blocks salt penetration of the meat. If the skin is on, the brine will enter and penetrate the non-skin side more easily. I know dry brining chicken and turkey are all the rage, but I doubt the salt goes very far into the meat. I think the reason people like this method so much is because the salt helps make the skin crispy and salty, like cracklins.
It is a better strategy to work the salt, along with some herbs and oil, under the skin. The oil helps transmit the herb flavors, and the meat juices dissolve the salt.
Making a brine
Most brines are 5 to 10 percent by weight. In general, you want the total brine to weigh at least two to three times the weight of the meat so there is enough salt to do the job. You want a predetermined concentration of salt so you can get consistent results day in and day out.
The problem in making a brine is that there are different types of salt: Table salt, kosher salt, pickling salt, etc. Some experts recommend you not make a brine from table salt because it has small quantities of other compounds such as iodine mixed in, but I think too much is made of this. I can't tell the difference in taste in the cooked food. So I say good old table salt will do.
But the size and shape of the grains is different for each type, which means the air spaces between each grain is different, which means that the actual amount of salt by weight can vary drastically from one type to another if you measure by volume. For example, one tablespoon of table salt has almost twice as much NaCl as one tablespoon of kosher salt.
Furthermore, if you mix a cup of water with a cup of table salt, you don't get two cups because of the air in the salt. You get more like 1.75 cups. If you use kosher salt you get more like 1.5 cups because there is more air. Read my article on The Zen of Salt for more info about different salts.
But a pound of any of these salts contains the same amount of NaCl. For that reason, salt is best measured by weight, not volume. When you are making a brine, go by weight and you'll never go wrong. At this juncture, permit me to recommend my favorite new toy, the OXO Good Grips Scale with Pull-Out Display. It is also valuable for measuring flour, sugar, chopped onions and other foods which also have the problem of airspaces that make it difficult to measure by volume.
The Blonder Brine (6.4 percent)
Blonder realized that one of the problems in making a brine is that all recipes must specify which kind of salt you must use. But if the recipe calls for Kosher salt and you only have table salt, you need to use a conversion table because kosher salt is made of flaky crystals and 1 tablespoon contains about half the salt as a tablespoon of table salt.
1 cup Morton's table salt = 1.9 cups Morton's Kosher Salt
Substitute one for the other without converting properly and you could badly over-salt your food. It gets weirder because different brands of salt have different volumes. But Blonder knows that a pound of salt, regardless of type, regardless of volume, contains the same amount of sodium chloride. So if you don't own an accurate scale, here's a foolproof method he devised using Archimedes' Principle of displacement:
Basic Blonder Brine (6.4 percent). Add one cup of hot water to a two cup measuring cup. Then pour in salt, any salt, until the water line reaches 1.5 cups. That will be about 1/2 pound of salt by weight. "You'll end up pouring in nearly two cups of kosher salt -- it seems like it will never end -- but once it enters the measuring cup, the water infiltrates the voids between the grains of salt, and compensates for the lower density" he says. "Then dump this slurry into a gallon of cold water and away you go. Easy to remember. Impossible to screw up." This recipe results in a 6.4 percent brine.
Blonder Brine Amped Up (6.4 percent)
Yield. Makes 1 gallon, enough for 6 pounds of meat. 2 gallons will handle most turkeys depending on the diameter of the container
Preparation. 10 minutes
1 cup hot water in a 2 cup measuring cup
1/2 pound salt, any type
1/2 cup white sugar
4 tablespoons of garlic powder (not garlic salt)
3 tablespoons ground black pepper
1 gallon cold water
About the salt. Any salt will do, table salt, kosher salt, "sea" salt. The standard round container of Morton's Salt is 1 pound, by the way. Step 1 below shows you how to get it right without a scale regardless of the type of salt you use. Click here for more about The Zen of Salt.
About the sugar. A good ratio for sugar to salt is 1/2 to 1 part of sugar to 1 part of table salt. Molasses dissolves faster in cold water, but it can color the meat. It is good with some meats, bad with others. Ditto for brown sugar which is colored with molasses. If you are diabetic, you can skip the sugar, although truth be told, very little actually gets into the meat.
About other flavorings. Herbs do not dissolve much in a brine so they do not penetrate, so don't waste your money. I have had luck with apple juice replacing some of the water, but I prefer turkey that tastes like turkey, not apple juice.
1) Add one cup of hot water to a two cup measuring cup. Then pour in salt, any salt, until the water line reaches 1.5 cups. The water will swallow up almost exactly 1/2 pound regardless of whether you use table salt, kosher salt, pickling salt or sea salt. The volume of these salts may differ, but their water displacement will be the same. Pour the slurry into a very clean non-reactive container large enough to hold the meat and 1 gallon of water. Then add the sugar, garlic and black pepper. Stir until most of the sugar is dissolved. The garlic and pepper will not dissolve. Then add the cold water.
2) Submerge the meat in the brine in a non-reactive container and refrigerate. If you can't fit it in the fridge, you can pour it into a beer cooler and toss in a gallon zipper bag filled with ice. Or two. The bags should be tight so that when the ice melts it doesn't dilute the brine. Another option is to fill a quart juice or soda bottle with water and freeze it. Then screw on the cap. Wait until after the bottle has frozen because water expands when it freezes and it can blow off the cap. Wash off the outside of the bottle thoroughly and toss it in the brine. You may need to weigh the meat down to submerge it. If you cannot submerge it, make sure you turn it periodically and extend it's time in the bath. If you brine in a zipper bag (a great technique), periodically grab the bag and squish things around; flip the meat so the brine can get in from all sides.
How long you need to brine depends on (1) the strength of the brine and (2) the thickness of the meat. The total weight of the meat has nothing to do with it. That's because it takes longer for salt to migrate through a 3" pork chop than it does for a 1.5" chop, and it takes more than twice the time.
Before brining, find the thickest part of meat and use the timing guide below. Always err on the underside! An under-brined pork chop will still be delicious, especially if you don't overcook it. When it comes to brining, more is not better. A reader who brined ribs overnight emailed me to say the result tasted like ham from a can.
1/2" thick meat: 1/2 hour
1" thick meat: 1 hour
2" thick meat: 3 hours
3" thick meat: 8 hours
Now these numbers are not precise -- they are guidelines. Start there and adjust to your taste on subsequent cooks. During short brines, the salt remains concentrated very close to the surface of the meat. As you can see from the sidebar, brines penetrate deep when the meat is heated during cooking.
3) Remove the meat, rinse with cold water to wash off excess salt off the surface, and thoroughly pat dry with paper towels. If time permits, let the meat rest in the refrigerator for another hour or more to allow the brine to equalize itself throughout the meat and for the rub to penetrate.
All text and photos are Copyright (c) 2011 By Meathead, and all rights are reserved
For more of Meathead's writing, photos, recipes, and barbecue info please visit his website AmazingRibs.com and subscribe to his email newsletter, Smoke Signals.